HP Integrity PCIe 2-port 10GbE-SR Fabric Adapter
For Hp integrity servers running OpenVMS and HP-UX . Current HPE firmware for Integrity
Requires 2 x AT139A 10Gb SFP for MMF up to 300M
For other Transceivers/SFP's, parts or if using Long range fiber click here.
Warranty is still valid with NON-HP SFP+/transceivers should you wish to use your own.
Product & Install Guide for AM225A and AM232A AM233A (same base PCI-e card)
Additional parts, that is the SFP/transceiver, are required for functionality. Long Range or Copper are available at a slightly higher cost.
Please call us, order online, or use the contact form for a quote.
HP Integrity PCI-e 2-port 10GbE SR Adapter AM225A - Part No AT139A - click here
HP Integrity PCI-e 2-port 10GbE LR Adapter AM232A - Part No J9151A - click here
HP Integrity PCI-e 2-port 10GbE Cu Adapter AM233A - Part No Click Here - based on cable length
For use in rx2800 i2 rx2800 i4 rx2660 rx6600 rx3600 Superdome with PCI-e backplane.
Does not work on PCI-X based systems. System requires 2GB memory per adapter to correctly function.
HP Renew Reference Part No. AM225AR
Note: Some Online vendors are selling a version of this card that is not corectly labelled AM225A, but by another HP 6-3 part number.
This card, though physically identical, contains a different version of firmware and PCI-ID which will not allow an HP Integrity runng HP-UX to "claim" the device.
These non-working cards can be found at online stores for only $100-140. They WILL function in a Microsoft/Proliant Server and some versions of Linux.
This same issue applies to several Fiberchannel and Network cards, where HP has adapted their technology across multiple platforms.