HPE Integrity rx2800 i4 Server AT101A EZ-CONFIG

HPE Integrity rx2800 i4 Server  AT101A EZ-CONFIG
HPE Integrity rx2800 i4 Server  AT101A EZ-CONFIG HPE Integrity rx2800 i4 Server  AT101A EZ-CONFIG HPE Integrity rx2800 i4 Server  AT101A EZ-CONFIG HPE Integrity rx2800 i4 Server  AT101A EZ-CONFIG HPE Integrity rx2800 i4 Server  AT101A EZ-CONFIG HPE Integrity rx2800 i4 Server  AT101A EZ-CONFIG

Product Code: AT101A
Availability: In Stock NOW
Price: $5,995.00 $5,700.00

Available Options

* HPE Integrity rx2800 with 6G SAS Controller, USB, VGA Graphics, Advanced ILO3 4 x 1Gb LAN Ports,1 x P.Supply, 1 x Memory Carrier:
Total Box:

Memory Carrier 1 required per CPU . Max 4 in server:
Total Box:

rx2800 CPU (cpus must match):
Total Box:

rx2800 Memory minimum 1 option per cpu up to 384GB total:
Total Box:

Power Supply (max.2 for rx2800 or 6 for C3000) :
Total Box:

rx2800 Backplane OpenVMS/HP-UX (minimum 1, max 2):
Total Box:

DVD Blu-Ray CD:
Total Box:

RAID/SAS Controllers PCI-e & On-board for OVMS/HP-UX:
Total Box:

Storage (8 max per server) WI = Write Intensive MU = Mixed Use NEW = NEW Ref = Refurbished:
Total Box:

HP Integrity Graphics (additional to on-board):
Total Box:

Fiberchannel PCI-e OVMS/HP-UX:
Total Box:

Rack Kit:
Total Box:

* HPE/VSI OS Licenses OpenVMS/HP-UX/Tru64:
Total Box:

rx2800 Security:
Total Box:

System Build/Configure (use instructions box below):
Total Box:

24/7/ 4 Hour Response Time Onsite Maintenance:
Total Box:

Warranty (US/Canada/International):

Qty:     - OR -   Add to Wish List
Add to Compare
Shipping cost
* Country:
* Region / State:
* Post Code:

HPE Integrity rx2800 i4   AT101A - (This server is upgradable to the rx2800 i6) Easy Product Configurator

Integrity rx2800 i4 includes: 
1 x AT101A Renewed Server ,
4 x On-Board 1Gbit Ethernet NIC,
1 x ILO3 Net Port,
2 x USB (Front/Rear)
2 x VGA (Front/Rear) 
1 x DB9 Console Port, P410i 6G RAID Ctr (requires 512MB BBWC for All RAID types beyond 0+1)
1 x AT103A 6 Slot Memory Carrier  (add up to 3 more)
1 x AT133A 1200W Platinum Power Supply
Firmware 52.0 for i4/i6

If there is a red asterisk next to the header, you must choose one option offered

Please email us for a formal quote with required License type, Service and Support type. We will quote within 48 hours.

Note: These systems are fully updated (current firmware installed)  to HPE's exacting standards for maintenance.
We guarantee full eligibility for on-site service from HPE.
The next day replacement warranty is for next business day by 3pm or 2-5 days internationally.
To get a FORMAL quote via email or fax, please configure and ORDER it after creating an account or logging in with your existing account information (it is free to set up and easy)
Order it and note in the  comments section that you require a FORMAL QUOTE - Use the Order with PO  feature at checkout  - there is no obligation with that feature. Make sure to state it is for RFQ purposes only.
If you are not within the US or Canada, please choose the option for maintenance and we will send a quote accordingly per the country where the server is located. We will need you to enter the full address of the location of the server installation as this can greatly affect maintenance fees.

In case you want to run HPE OpenVMS (which runs fine on these but is NOT supported by VSI), you would need 1 license per 4 cores.
Quickspecs here



* Determines Mandatory Option
Use AM252A to extend internal RAID to achieve RAID Levels 0,1,5,6 across all 8 drives
If you are using the 16Gbit option in a OpenVMS configuration, you will need to use the VSI variant of OpenVMS as HPE OpenVMS does not include the drivers for the 16Gbit card and are not available for HPE OpenVMS 8.4.

Install up to 3 Memory Kits Per Carrier. 2 Memory Carriers Max per CPU (up to 192GB per CPU or 384GB total) You must order 1 cpu 1 memory carrier and 1 power supply

Note that if using 2 cpus you are limited to 8 total DIMMS installed if using 120V Power (low line). To use more than 8 x dimms and 2 x cpus you must connect to a 200~240v power source (high-line)

Note to OpenVMS Users:

The HP (HPE) Integrity rx2800 i4 is not supported by HP's (HPE's) version of OpenVMS. It is supported only by VMS Software's (VSI) version (8.4-2 and higher). You will need to purchase VMS Software OS and Layered Products licenses.
You may wish to consider purchasing the rx2800 i2 . This has similar performance, same options as the i4 and is capable of running OpenVMS from HP(HPE) and VSI.
Should you wish for Software Support etc from VSI, please contact them at info@vmssoftware.com (all locations) or Telephone 978.451.0110 .


Application Number: 201 025 834
Company: Hewlett Packard Enterprise Company
Device Name: Server
Model: RSVLA-RC01
Sub-Model: rx2800 i2, rx2800 i4
Authorization Number: HPQ-RSVLA-RC01
Alphanumeric Authorization Number: HPQRSVLARC01
Manufacturer: Hewlett Packard Enterprise Company
Country: China (Czech Republic, United Kingdom, Singapore, Germany)



Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

  • caorusel