AT101A Integrity rx2800 i4 - (This server is upgradable to the rx2800 i6)
Easy Product Configurator
Integrity rx2800 i4 includes:
1 x AT101A Refurbished Server ,
4 x On-Board 1Gbit Ethernet NIC,
1 x ILO3 Net Port,
2 x USB (Front/Rear)
2 x VGA (Front/Rear)
1 x DB9 Console Port, P410i 6G RAID Ctr (requires 512MB BBWC for All RAID types beyond 0+1)
Install up to 3 Memory Kits Per Carrier. 2 Memory Carriers Max per CPU (up to 192GB per CPU or 384GB total)
You must order 1 cpu 1 memory carrier and 1 power supply
Please email us for a formal quote with required License type, Service and Support type. We will quote within 48 hours.
Note: These systems are fully updated (current firmware installed) to HPE's exacting standards for maintenance.
We guarantee full eligibility for on-site service from HPE.
The next day replacement warranty is for next business day by 3pm or 2-5 days internationally.
To get a FORMAL quote via email or fax, please configure and ORDER it after creating an account or logging in with your existing account information (it is free to set up and easy)
Order it and note in the comments section that you require a FORMAL QUOTE - Use the Order with PO feature at checkout - there is no obligation with that feature. Make sure to state it is for RFQ purposes only.
In case you want to run HPE OpenVMS (which runs fine on these but is NOT supported by VSI), you would need 1 license per 4 cores. So if you want 2 x 4 core cpus then you need 2 licenses. If you want 2 x 8 core cpus then you need 4 x licenses (it gets expensive!)
* Determines Mandatory Option
Use AM252A to extend internal RAID to achieve RAID Levels 0,1,5,6 across all 8 drives
Note that if using 2 cpus you are limited to 8 total DIMMS installed if using 120V Power (low line). To use more than 8 x dimms and 2 x cpus you must connect to a 200~240v power source (high-line)
Note: For Advanced parts replacement without a deposit being required, the original products invoice must be paid and received by Island Computers., unless agreed to in writing.
Note to OpenVMS Users:
The HP (HPE) Integrity rx2800 i4 is not supported by HP's (HPE's) version of OpenVMS. It is supported only by VMS Software's (VSI) version (8.4-2 and higher). You will need to purchase VMS Software OS and Layered Products licenses.
You may wish to consider purchasing the rx2800 i2 . This has similar performance, same options as the i4 and is capable of running OpenVMS from HP(HPE) and VSI.
Should you wish for Software Support etc from VSI, please contact them at firstname.lastname@example.org (all locations) or Telephone 978.451.0110 .